Ricoh AP1400/AP2000 manual 121, Move the printer to the place where it was installed. Insert

Cleaning the Printer

B Pull out the plug from the socket. Remove all the cables from the printer.

C Pull the paper tray out of the printer.

TS4Y270E

D Move the printer to the edge of a stable table or desk.

TS4M030E

Important

❒Do not put the printer on an un- stable or tilted surface.

❒If the optional tray unit is equipped with your printer, do not move the printer and the optional tray unit together as they are not securely attached.

❒When lifting the printer, make sure that the optional tray unit is not attached to the printer.

E Pick the stopper inside the roller with your fingers (A), slide it to

the left, so that the paper feed roller can be released (B).

2

1

TS3M040E

F Clean the rubber part of the roller with a soft damp cloth. After wip- ing it with a damp cloth, wipe it with a dry cloth to remove the wa- ter.

Important

❒Do not use chemical cleaner or organic solvent such as thinner or benzene.

G With the round part of the roller up (A), insert the roller into the shaft until the roller clicks (B).

1

2

10

TS3M050E

H Move the printer to the place where it was installed. Insert the

121