Troubleshooting

Type 2 printer

RCAUTION:

The paper tray does not have a stopper. When pulling it out, be careful not to pull it strongly. If you do, the tray might fall and cause personal injury.

Note

Please refer to the inside of the front cover of this manual to con- firm which printer (Type 1 Printer or Type 2 Printer) you have.

A Pull the paper tray out of the printer.

TS4Y270E

B Place the tray on a flat surface. Re- move paper from the paper tray.

C Clean the friction pad (gray or brown part) with a soft damp

10 cloth. After wiping it with a damp cloth, wipe it with a dry cloth to remove the water.

TS4Y280E

Important

Do not use chemical cleaner or organic solvent such as thinner or benzene.

D Load paper with the print side up into the paper tray. Insert the pa- per tray into the printer until it stops.

TS4Y100E

Note

If misfeeds or multi-feeds of pa- per occur after cleaning the fric- tion pad, contact your sales or service representative.

Follow the same procedure to clean the friction pad of the op- tional tray and the envelope feeder.

Cleaning the Paper Feed Roller

If the paper feed roller becomes dirty, misfeeds might occur. In this case, clean the roller as follows:

118

Page 138
Image 138
Ricoh AP1400/AP2000 manual Cleaning the Paper Feed Roller, 118, Pull the paper tray out of the printer