Ricoh AP1400/AP2000 manual Load paper into the paper tray with the print side up

Type 1 Printer: Loading Paper and Other Media

A Pull the paper tray out until it stops. After that, lift it slightly, then pull it out of the printer.

TS3Y150E

Note

❒Do not touch the three white pins on the right front side of the printer.

B Adjust the paper size dial to match the size and feed direction of paper in the paper tray.

A

3

TS3Y160E

Important

❒If you want to use paper sizes or feed directions that are not list-

ed on the paper size dial, adjust the dial to “p”. In this case, you

should specify the paper size using the operation panel. ⇒ P.125 “Making Printer Settings with the Operation Panel”

C Adjust the rear and side guides to the paper size you want to load.

TS3Y170E

D Load paper into the paper tray with the print side up.

TS3Y180E

	Important
❒ Make sure the top of the stack is
	not higher than the limit mark
	inside the tray.	9
❒	Make sure the paper fits under

the rear guide.

E While lifting the front side of the tray, place the tray into the print-

83