Ricoh AP1400/AP2000 manual TCP/IP Required Components, Windows NT4.0, Select the Services tab

Windows NT Configuration

TCP/IP Required Components

The Windows NT system performing the NIB configuration must have the TCP/IP protocol installed. The following steps describe how to check for and, if necessary, add the required TCP/IP components.

Windows NT4.0

A Click on the Windows [Start] button; select Settings and Control Panel. B Double click on Network and select the Protocols tab.

If TCP/IP Protocol is not in the list of Network Protocols, click on Add to in- stall it.

C

5

D

Select the Services tab.

If either Microsoft TCP/IP Printing or Simple TCP/IP Services is not on the list of Network Services, click on [Add] to install them.

Click on [Close] when all protocols and services have been added.

If the TCP/IP protocol has just been added, Windows will prompt for the IP address and other TCP/IP parameters.

The new protocols and services will not be available until the system is re- started.

26