Ricoh AP1400/AP2000 manual Press Enter Press UT until the follow- ing message appears

Type 1 Printer: Loading Paper and Other Media

sides of the flaps on the right as shown in the illustration.

TS3Y311E

Important

❒Make sure that the envelope flaps are securely folded down, and that there is no air inside the envelopes.

Note

❒Make sure that the top of the stack is not higher than the limit mark on the side guides.

❒Do not press down on the stack of envelopes with too much force.

D Slide the side guides against the edge of the envelope stack.

Note

❒Make sure that the edges of en- velopes fit under the side guides.

E Specify the envelope size and feed direction using the operation panel as follows.

APress {Menu}

The following message appears.

Main Menu: j

Job Control l

BPress {Enter}.

The following message appears.

Job Control: j 1.Paper Input l

CPress {Enter}.

DPress {U}{T} until the follow- ing message appears.

Paper Input: j 3.Paper Size l

EPress {Enter}.

The following message appears.

Paper Size: j 1.Bypass Tray l

FPress {Enter}.

GUsing {U}{T}, select the enve- lope type you want to use.

Reference

For informations on types of envelopes you can select, see P.65 “Paper and Other Media Supported by Your Printer”.

HPress {Enter}.

IAfter the panel display chang- es, press {On Line}.

The panel display returns to the	9
ready condition as follows:

Ready

F Start the print operation with your computer.

Type 1 printer: loading envelopes into the envelope feeder

Note

❒Please refer to the inside of the front cover of this manual to con-

85