Ricoh AP1400/AP2000 manual Type 1 Printer Interior

Guide to the Printer

5.Output Tray Extender

Pull out this extender when printing on long paper.

6.Output Tray

Printed output is stacked here with the print side face down.

10.Paper Size Dial

Adjust this dial to match the size and feed direction of the paper loaded in the paper tray.

11. Back Plates
	1

Remove to install some options.

7.Ventilator

These holes help to keep components in- side the printer from overheating.

Important

❒Do not leave the ventilator ob- structed or blocked. Doing so cre- ates the danger of malfunction due to overheating.

8.Front Cover Release Buttons

Use these buttons to open the front cover.

9.Paper Tray

Loads up to 250 sheets of plain paper (80 g/m2, 20 lb) into this tray for printing.

⇒P.65 “Paper and Other Media Supported by Your Printer”

12.Parallel Interface Connector

Plug into the interface cable that connects the printer to your computer.

13.Ventilators

These holes help to keep components in- side the printer from overheating.

Important

❒Do not leave the ventilators ob- structed or blocked. Doing so cre- ates the danger of malfunction due to overheating.

14.Power Cord

Plug this cord into a wall outlet.

Type 1 Printer: Interior

Note

❒Please refer to the inside of the front cover of this manual to confirm which printer (Type 1 Printer or Type 2 Printer) you have.

3