Getting Started
Setting the Warning Display Option
S
Setting the Warning Display Option
You can configure SANsurfer FC HBA Manager to display warning messages when specific conditions occur.
To set the warning display option:
1.To access the Options dialog box, choose one of the following methods:
On the SANsurfer FC HBA Manager main window, open the Settings menu, and then click Options.
Press CTRL+SHIFT+T.
The Options dialog box opens (Figure
Figure 5-6 Options Dialog Box: Warning Displays
2.Under Warning Displays, do one of the following:
If you want the warning dialog boxes to appear, select the Enable Warning Displays check box. Enabled is the default.
If you do not want the warning dialog boxes to appear, clear the Enable Warning Displays check box.
3.When you finish making selections, do one of the following:
To save the changes and close the Options dialog box, click OK.
To close the Options dialog box without saving any changes, click Cancel.
