A
Getting Started Specifying the Adapter Driver Settings
Figure 5-13 Shared Components Dialog Box
3.Click the shared device or LUN in the left column to view the shared hosts in the right column.
4.To close the Shared Components dialog box and return to the Shared Device Found dialog box, click OK.
5.To close the Shared Device Found dialog box, click OK.
When SANsurfer FC HBA Manager updates the configuration to reflect configuration changes made by another host, the “configuration change - reloading” message appears. Click OK.
Specifying the Adapter Driver Settings
NOTE:
If you are using the IOCTL module with inbox drivers in Red Hat 4.0, the driver settings are disabled. The driver settings are also disabled if you are using sysfs supported inbox drivers with SLES 10.0.
When you set adapter driver parameters, specify the following:
Target: Display Options. Indicates that only targets configured using SANsurfer FC HBA Manager are seen by the system.
Target Binding Options. Indicates that the driver binds the target ID using the target's world wide port name (WWPN) or port ID.
