HP 1105 manual Appendix D Post Error Messages

Control panel message	Description	Recommended action
2219-USB Key Provisioning file has invalid	Provisioning file contained on the USB key	1.	Recreate the provisioning file using
header identifier	has been corrupted or is not a valid version		third party management console
	for the current ME firmware.		software.
		2.	If the error persists and system BIOS
			has been recently updated, restore
			previous system BIOS version.
			Otherwise, update the ME firmware
			version.
		3.	If the error still persists, replace the
			system board.
2220-USB Key Provisioning file has	Provisioning file contained on the USB key	1.	Reboot the computer.
mismatch version	is not a valid version for the current ME	2.	If the error persists and system BIOS
	firmware.
			has been recently updated, restore
			previous system BIOS version.
			Otherwise, update the ME firmware
			version.
		3.	If the error still persists, replace the
			system board.
2230-General error during MEBx execution	Error occurred during MEBx execution	1.	Reboot the computer.
	which fails into the “General” grouping.	2.	If the error persists, update to the latest
	Status information displayed along with the
	error provides further clarity into the failure.		BIOS version and ME firmware
	MEBx handles transference of information		version.
	between the system BIOS and ME	3.	If the error still persists, replace the
	firmware.
			system board.
2231-ME error during MEBx execution	Error occurred during MEBx execution	1.	Reboot the computer.
	which fails into “ME” grouping.	2.	If the error persists, update to the latest
			BIOS version and ME firmware
			version.
		3.	If the error still persists, replace the
			system board.
2232-AMT error during MEBx execution	Error occurred during MEBx execution	1.	Reboot the computer.
	which fails into “AMT” grouping.	2.	If the error persists, update to the latest
			BIOS version and ME firmware
			version.
		3.	If the error still persists, replace the
			system board.
2233-HECI error during MEBx execution	Error occurred during MEBx execution	1.	Reboot the computer.
	which fails into “MEI or HECI” grouping.	2.	If the error persists, update to the latest
			BIOS version and ME firmware
			version.
		3.	If the error still persists, replace the
			system board.
Invalid Electronic Serial Number	Electronic serial number is missing.	Enter the correct serial number in Computer
		Setup.

132 Appendix D POST Error Messages