Franke Consumer Products SM 52M, FLAT 603, SM 56M Press the button Then within 4 seconds buttons

Models: FLAT 603 SM 56M SM 52M FLAT 604 CA 52M

1 166
Download 166 pages 46.87 Kb
Page 19
Image 19

2. Press the button

and then (within 4 seconds) buttons

and

to set the desired

cooking duration. Let us suppose that we set the cooking time to 30 minutes; the display will read as follows:

Release the button and after 4 seconds the correct time will reappear along with the symbol and the writing “AUTO”.

3. Press the button

followed by the buttons

and

to set desired end cooking

time. Let us suppose this time to be 13:00

 

 

4.Release the button and the current time will be displayed after approximately 4 seconds:

The word “AUTO” will light up reminding you that the cooking time and end cooking time have been programmed in automatic mode. Now the oven will turn on automatically at 12:30 and then turn off after 30 minutes. When the oven is turned on, the symbol of a hot pan will be displayed for the entire cooking time. At any time during the cooking process, press button to display the set cooking duration, and button to display the end cooking time.

At the end of cooking time the buzzer rings; volume can be changed during emission by pressing button . To turn it off, simply press any of the buttons except and .

Immediate cooking with set duration

By programming the cooking time only (points 1 and 2 of the “Delayed start with set cooking time” section), cooking will start up immediately.

To cancel a scheduled cooking process

Press the button .

Minute minder function

The minute minder allows you to set a given amount of time from which the countdown begins. This feature does not turn the oven on or off; it merely sounds when the time has elapsed.

Press button to display:

Then use buttons

and

to set the desired time

After the button has been released, the countdown begins and the current time is displayed.

When the time is up, a buzzer sounds, which can be turned off by pressing any of the

buttons (except buttons

and

) at this point the symbol

will also be turned off.

Modifying and cancelling data

 

 

The data entered can be changed at any time by pressing the corresponding button and button or .

When the data for the cooking time is cancelled, the data for the end cooking time is also cancelled automatically, and vice versa.

If the oven has been programmed, it will not accept end cooking times which come before the start of the cooking process.

N.B. The oven will stay hot around the set temperature for a considerable period of time after it has been switched off; to avoid overcooking or burning the food, remove it from the oven immediately.

18

Page 19
Image 19
Franke Consumer Products SM 52M Press the button Then within 4 seconds buttons, To cancel a scheduled cooking process