System Setup
|
| Video | ||
No Disc |
|
|
|
|
Programme | TV Aspect |
| : 16:9 Wide | ► |
Setup | 3D Noise Reduction | : Off | ► | |
| Video Output |
| : Component ► | |
| HDMI/DVI Resolution | 576P |
| |
| DivX(R) Registration | 720P |
| |
|
|
| 1080i |
|
|
|
|
|
|
MOVE | OK | RETURN | EXIT | |
|
|
|
|
|
Available video output jacks are as follow.
Available Video Output Jack
| Setting mode | Component mode | RGB Mode | ||
Output jack |
| P.SCAN off mode (Interlace mode) | P.SCAN on mode | ||
Component Output | O | O | X | ||
(Y, PB, PR) | (TV in progressive mode) | ||||
|
| ||||
|
|
|
|
| |
AV1 Scart | R, G, B | X | X | O | |
Composite | O | O | X | ||
Composite | Video out | O | O | O | |
O | O | O | |||
If the TV supports Progressive Scan, press the P.SCAN button on the front of the DVD Recorder & VCR to enjoy.
Setting up the Progressive scan
1. In Stop mode, press the P.SCAN button on the front of the DVD Recorder & VCR.
The message “Press [Yes] to confirm Progressive scan mode. Otherwise, press [No].” will appear.
2. Press the ◄► buttons to select Yes, and then press the OK button.
3. Set your TV to Progressive input (using the TV remote control.)
■ Progressive setting is only available when the DVD recorder is in stop mode.
Canceling the Progressive scan
1. In Stop mode, press the P.SCAN button on the front of the DVD Recorder & VCR.
The message “Press [Yes] to confirm Interlace scan mode. Otherwise, press [No].” will appear.
2. Press the ◄► buttons to select Yes, and then press the OK button.
3. Set your TV to Interlace input (using the TV remote control.)
▌HDMI/DVI Resolution (DVD-VR355 only)
This setting is used when the unit is connected by HDMI or DVI with Display devices (TV, projector, etc).
•576P : 720 x 576
•720P : 1280 x 720
•1080i : 1920 x 1080
English - 28