Reference
Troubleshooting (DVD)
If your product malfunctions, go through the check points below before contacting a Samsung authorized service centre.
Problem |
| Explanation/Solution | |
|
| ||
No power. | • Check whether the power cord is securely plugged into the power outlet. | ||
• Did you press the | /I button of your DVD Recorder & VCR. | ||
|
The input is displayed The DVD Recorder & VCR requires some time to initialise after it is turned on.
for a while when the If 'Quick Recording' function is set to on, the DVD Recorder & VCR will power on quickly,
power turns on. which enables you to immediately record a desired channel. (see page 33)
•Check whether the power cord is securely plugged into the power outlet.
Cannot record TV • Did you set the DVD Recorder & VCR programme settings correctly?
programmes. • Check the free space on your disc.
•Check the antenna cable is connected.
Timer recording does | • Check the recording time, end time and current time settings again. | |
• Recording will be canceled if the power is interrupted due to a power failure or other | ||
not work properly. | ||
reason during recording. | ||
| ||
|
| |
Cannot record. | • Check whether the disc is formatted. This product can record on formatted discs only. | |
• Check whether your disc has a sufficient free space. | ||
|
I pressed the REC
button but there is no If a programme is copy protected, you cannot record it. response.
| Press the PROG ( / ) buttons of your DVD Recorder & VCR at the same time when | |
I forgot the password | the power is on, and then press the STANDBY/ON button. | |
All settings including password will revert to factory settings. | ||
for parental lock. | ||
Do not use it if not absolutely required. | ||
| ||
| (Note that this function is available only when there is no disc inserted.) |
•Check whether the disc is inserted correctly with the label facing up.
Cannot play the disc. • Check the regional code of your DVD disc.
•This DVD Recorder & VCR cannot playback some types of disc.
•Are you watching a programme in slow or skip mode?
If you are playing a programme at a speed other than normal speed, sound is not output. (except for forward search Playback (Fast 1) and you cannot also hear during
No sound. | scanning MPEG4 in all mode.) | |
• Check the connections and initial settings. | ||
| ||
| • Check whether the disc is damaged. | |
| Clean up the disc, if necessary. | |
| • Check whether the disc is inserted correctly with the label facing up. |
English - 79