Recording immediately

RAM VR

XP

PR 7

Available Time 00:28

 

 

DVD-VR355 only

Before you start

1. Check the antenna cable is connected.

2. Press the OPEN/CLOSE button and place a recordeble disc on the disc tray.

3. Check the remaining time on the disc.

DVD-RAM/DVD±RW/+R discs should be formatted or initialised in advance before beginning recording. Most new discs are sold unformatted. Make sure to format your unformatted discs before recording.

4. Press the OPEN/CLOSE button to close the disc tray. Wait until LOAD disappears from the front panel display.

▌Recording the current programme you are watching

1. Press the PROG/TRK ( / ) buttons or number buttons to select the station you want to record.

2. Press the REC SPEED button repeatedly, to select the recording speed (quality).

→SP → LP → EP → XP

3. Press the REC button.

▌Recording from external equipment you are watching

1. Power on your DVD Recorder & VCR and switch to AV mode by pressing the INPUT SEL. button on the remote control. The front panel display changes in the following sequence.

→PR → AV1 → AV2 → AV3 → DV

2. Press the REC SPEED button repeatedly to select the recording speed (quality).

→SP → LP → EP → XP

3. When your DVD Recorder & VCR is in the Stop mode, set the operation mode of your external devices to play mode.

4. Press the REC button on your DVD Recorder & VCR when the image from which you want to start recording is displayed.

To pause recording

Press the PLAY/PAUSE ( ) button to pause a recording in progress.

●Press the PLAY/PAUSE ( ) button again to resume recording.

●You can switch channels by pressing the PROG/TRK ( /) buttons while recording pauses.

To stop recording

Press the STOP button to stop a recording in progress.

●When using DVD-RAM/DVD±RW/DVD±R discs, the message “Updating the disc information. Please wait for a moment.” is displayed.

ecordingR

English - 53