Connecting HDMI/DVI to a TV

 

(DVD-VR355 only)

 

If your TV has a HDMI/DVI input, connect the HDMI/

 

DVI cable to the TV. You will enjoy the best quality

 

images and sounds.

Up

▌Case 1 : Connecting to a TV with HDMI Jack

Setting

the rear of the DVD Recorder & VCR to the HDMI IN

 

• Using the HDMI cable, connect the HDMI OUT jack on

&

jack of your TV.

onnectingC

• Press the input selector on your TV remote control

 

 

until the HDMI signal from the DVD Recorder & VCR

 

appears on your TV screen.

HDMI cable (not supplied)

▌Case 2 : Connecting to a TV with DVI Jack

• Using the DVI Adapter Cable, connect the HDMI OUT jack on the rear of the DVD Recorder & VCR to the DVI IN jack of your TV.

• Using the audio cables, connect the AUDIO (red and white) OUT jacks on the rear of the DVD Recorder & VCR to the AUDIO (red and white) IN jacks of your TV. Turn on the DVD Recorder & VCR and TV.

• Press the input selector on your TV remote control until the DVI signal from the DVD Recorder & VCR appears on your TV screen.

■ To watch through the HDMI output, set the digital audio output to PCM. (See page 26)

■ Depending on the HDMI device (TV/HDMI Receiver) you use, audio may not be supported. If TV does not support Dolby digital/DTS, Audio output is not available when you set Digital output as Bitstream or select DTS On in Audio setup menu. In this case, set the digital audio output to PCM or DTS off.

■ If you connect the HDMI cable between Samsung TV, you can operate easily DVD Recorder

&VCR using the TV remote control. (This is only available with Samsung TVs that support Anynet+(HDMI-CEC).) (See pages 33~34)

■ Please check the logo (If your TV has an logo, then it supports Anynet+ function.)

DVI adapter cable

(not supplied)

red white

■To change HDMI output resolution, see pages 28~29.

■HDMI (High Definition Multimedia Interface) HDMI is an interface to enable the digital transmission of video and audio data with just a single connector. Since HDMI is based on DVI, it is completely compatible with DVI. The only difference between HDMI and DVI is that HDMI supports multi-channel audio.

Using HDMI, the DVD Recorder & VCR transmits a digital video and audio signal and displays a vivid picture on a TV having an HDMI input jack.

■HDMI connection description

HDMI connector - Both uncompressed video data and digital audio data (LPCM or Bit Stream data).

-Though the DVD Recorder & VCR uses a HDMI cable, the DVD Recorder & VCR outputs only a pure digital signal to the TV.

-If TV does not support HDCP (High-bandwidth Digital Content Protection), snow noise appears on the screen.

■Why does Samsung use HDMI? Analog TVs require an analog video/audio signal. However, when playing a DVD, the data transmitted to a TV is digital. Therefore either a digital-to-analog converter (in the DVD Recorder & VCR) or an analog-to-digital converter (in the TV) is required. During this conversion, the picture quality is degraded due to noise and signal loss. HDMI technology is superior because it requires no D/A conversion and is a pure digital signal from the DVD Recorder & VCR to your TV.

■What is the HDCP?

HDCP (High-bandwidth Digital Content Protection) is a system for protecting DVD content outputted via HDMI from being copied. It provides a secure digital link between a video source (PC, DVD, etc) and a display device (TV, projector, etc). Content is encrypted at the source device to prevent unauthorized copies from being made.

English - 20