Franke Consumer Products FTU 3807 W manual Hood body mounting, Recirculation Version Air Outlet

RECIRCULATION VERSION AIR OUTLET ø 150

• Insert pvc pipe 7 provided onto the Hood Canopy Outlet.
.	7

Hood body mounting

Ducting version

•In case the air outlet connection on the upper part of the hood has been chosen it will be necessary to remove the pre-cut

piece.

• Lean the hood body on the support and fix it laterally with the 4 12b screws.

•Cover the screw seats with the plugs 13 supplied with the hood.

Recycling version

• Remove the pre-cut piece.

• Lean the hood body on the support and fix it laterally with the 4 12b screws.

• Cover the screw seats with the plugs 13 supplied with the hood.

13

12b

12e

• Place the directioned grid 8 on the pipe and make sure that it is correctly installed.

8

• Fix the directioned grid 8 with the screws 12e supplied to- gether with the hood.

• Make sure that the charcoal filters are present.

EN	2
	20