Battery Information

Your device uses a rechargeable 3.7 volt lithium polymer battery of capacity 1000 mAH.

Important! The battery is included in your package, but does not come installed in the device. Before you can use your device, you must install the included battery. Please have the battery and a small screwdriver ready before you install the battery.

Approximately 4 hours are required to charge the battery for first-time use. Thereafter, your device may require up to 5 hours for a full charge. Battery power lasts for about 1 week of normal use or 5 hours of continuous use. When you see the low battery warning, you should recharge your battery.

Installing the Battery for the First Time

Follow these instructions to install the battery for the first time. Note: Please contact your local Franklin service office to replace the battery at a later time.

1.Turn your device over.

2.Use the screwdriver to unscrew the screw until it is loose.

Warning: The screw, even when loose, is attached to the battery compartment door and should not be removed.

3.Turn the device over and allow the battery compartment door to fall away from the device, catching it with your hand.

4.Insert the new battery by gently connecting the clip to the clip on your device.

4