Using the Reading Timer

Using the Reading Timer

You can also check your progress at any time, to see how long you have been reading. Simply press the power switch to turn the device on. The timer reappears and displays your progress. Continue/Fortfahren is highlighted. Press ENTER to select it. The timer continues and the device shuts off again. Or just wait for a few seconds and the timer will continue and the device will shut off again. Or you can pressto highlight Stop/ Stopp and then press ENTER.

✓✓ Ending a Session

At any time when the reading timer is running, you can stop the timer and end a session.

Press the power switch to turn the device on. The timer reappears and displays your progress. Press to highlight Stop/Stopp and press ENTER to stop timing.

Setting a Timer

1.Select Set a timer/Timer einstellen from the Reading Timer/Lese- Timer menu.

To set a timer, you must first select a time.

2.Pressorto select a time from among the reading time options.

You can select from 15 minutes to four hours, in 15 minute increments.

3.Pressor ENTER.

You are asked to enter the name of the book or reading assignment you want to time.

4.Type a name.

You can type up to 15 letters or

spaces. Hold and press a letter to type a capital.

5.Press ENTER to begin the timer.

Note: After a minute your device will automatically shut off. This is not a malfunction. To save battery power and the screen, the device shuts off during timing.

6.When you have reached your time limit, your device turns on and a tone sounds indicating the session is over.

You see a screen listing how long you read.

7.Press ENTER and continue through the reading log to return to the Reading Timer/Lese-Timer menu.

Viewing the Reading Log

The reading log is automatically displayed each time you finish a session. You can also access the reading log

at any time by selecting it from the Reading Timer/Lese-Timer menu.

1.After a session, press ENTER to select View reading log/ Leseprotokoll ansehen.

52