Features | Freedom9 2420 instruction

freeConnect Smart 2420 User’s Manual

Cost Reduction: VLANs can be used to create multiple broadcast domains, thus eliminating the need of expensive routers.

Port-based (or port-group) VLAN is the common method of implementing a VLAN, and is the one supplied in the Switch.

2.4Features

•24x10/100Mbps Auto-negotiation Fast Ethernet ports

•2x10/100/1000Mbps Auto-negotiation Gigabit Ethernet ports

•2xmini-GBIC (shared with two Gigabit Ethernet ports)

•All RJ45 ports support auto MDI/MDIX, so there is no need to use cross-over cables or an up-link port

•Half duplex transfer mode for connection speed 10Mbps and 100Mbps

•Full duplex transfer mode for connection speed of 10Mbps, 100Mbps and 1000Mbsps

•Wire speed reception and transmission

•Store-and-Forward switching scheme capability to support rate adaptation and ensure data integrity

•Up to 8k unicast addresses entities per device, self-learning, and table aging

•2Mbits packet buffer

•Supports IEEE 802.3x flow control for full-duplex mode ports

•Supports Port-based VLAN

•Supports Port-based QoS / IEEE 802.1P based QoS

•Supports Port-based Trunking

•Supports Port-Mirroring

•Supports Port-setting for Speed/Disable, Flow control

•Easy configuration via Web Browser

•Easy setting via Web Management Utility

•Standard 19” Rack-mount size