Freescale Semiconductor DEMO9S08AC60E manual References, Getting Started, Memory Map

1.5 References

The following reference documents are included on the enclosed documentation

CD:

•DEMO9S08AC60E_QS.pdf -- Quick Start Guide

•SPF-20805.pdf -- Schematic

•DEMO9S08AC60E_UG.pdf -- User’s Guide (this document)

1.6 Getting Started

To get started quickly, please refer to the DEMO9S08AC60E Quick Start Guide. This guide will walk you through connecting your DEMO9S08AC60E to your PC, running a test program, and installing CodeWarrior Development Studio.

1.7 Memory Map

The table below shows the MC9S08AC60 memory map. Accessing reserved memory locations will produce unpredictable results. Accessing unimplemented locations will produce an illegal-address reset.

Table 1-1MC9S08AC60 Memory Map

$0000 - $006F		Direct Page Registers	112 Bytes
$0070	- $086F	RAM	2048 Bytes
$0870	- $17FF	Flash	3984 Bytes
$1800	- $185F	High Page Registers	96 Bytes
$1860	- $FFFF	Flash	59,296 Bytes

1.8 Development Support

Application development and debug for the MC9S08AC60 is supported through the on-board USB - BDM interface (J33). There is also a 6 pin stand alone BDM interface available (J32). This header is non-populated in the default configuration and can be installed by the user if needed.

DEMO9S08AC60E User’s Guide, Rev. 0.1

12 Freescale Semiconductor