I. Start-up Checklist
Inspect all components and accessories for damage before and after installation.
Check installation for compliance with all national and local codes and ordinances.
Read and follow all manufacturer's installation instructions.
Check that circuit breaker(s) and electrical wire sizes are correct. If the unit is supplied with a power supply cord, insure that it is stored properly.
Check the condensate water drain outlet(s) to make sure they are in compliance with all national and local codes, that they are adequate for the removal of condensate water, and that they meet the approval of the end user.
Strictly follow installation instructions concerning clearances around the unit.
Secure components and accessories, such as the control door and front cover.
Check the unit air fi lter, condenser coil and evaporator coil for any obstructions.
Check for proper operation of all components.
Instruct the owner or operator of the units operation, and the manufacturer's recommended routine maintenance schedule.
NOTE: It is highly recommended that a maintenance schedule log book be prepared for recording the dates and times of service.
Operate the unit for twenty minutes. Record the unit's indoor/outdoor intake and discharge temperatures, amperage draw, and power voltage.
Assemble the Warranty Certifi cate, the Operation and Installation Manual, all accessory installation instructions and the name, address and telephone number of the Authorized Friedrich Warranty Service Company in the area for the owner or operator.
NOTE: Units are to be installed, inspected, and checked by qualified service personnel only.
20
