H. Final Checklist
WARNING
CHOKING HAZARD: Ensure all components, fasteners, and thumbscrews are securely in place after installation. Make sure that none have fallen into the dispenser unit/ice storage bin.
1)Is the icemaker level?
2)Is the icemaker in a site where the ambient temperature is within 45°F to 100°F (7°C to 38°C) and the water temperature within 45°F to 90°F (7°C to 32°C) all year around?
3)Is there at least 6” (15 cm) clearance at the right side for proper air circulation and at least 12” (30 cm) clearance at top for ease of maintenance and/or service?
4)Have all shipping cartons, tape, and packing material been removed from the icemaker? Is the cube guide in the correct position?
5)Have all electrical and water connections been made? Do electrical and water connections meet all national, state, and local code and regulation requirements?
6)Has the power supply voltage been checked or tested against the nameplate rating? Has a proper ground been installed to the icemaker?
7)Are the water supply and drain lines sized as specified? Are the water supply line
8)Is the compressor snug on all mounting pads? Have the refrigerant lines been checked to make sure they do not rub or touch other lines or surfaces? Has the fan blade (if applicable) been checked to make sure it turns freely?
9)Are all components, fasteners, and thumbscrews securely in place?
10)Has the end user been given the instruction manual, and instructed on how to operate the icemaker and the importance of the recommended periodic maintenance?
11)Has the end user been given the name and telephone number of an authorized service agent?
12)Has the warranty card been filled out and forwarded to the factory for warranty registration?
19
