•In areas where water damage is a concern, install in a contained area with a floor drain.
•Allow at least 6” (15 cm) clearance at the right side for proper air circulation and at least 12” (30 cm) clearance at top for ease of maintenance and/or service should they be required.
•Location should provide a firm and level foundation for the equipment.
D.Setup
WARNING
The installer must ensure the dispenser unit/ice storage bin is compatible with the icemaker, and the dispenser unit/ice storage bin and icemaker are properly attached and secured.
NOTICE
Do not use the side frame to lift the icemaker. See Fig. 1. Lift the icemaker from the base.
1a) Dispenser Unit: Follow the dispenser unit’s setup procedure.
1b) Ice Storage Bin: Unpack the ice storage bin and attach the 4 adjustable legs provided (bin accessory) to the bottom of the ice storage bin.
2) Position the dispenser unit/ice storage bin in its | Bin |
permanent location. |
3) If required, install an adapter kit or top kit. Contact your local Hoshizaki distributor for recommendations.
4)Level the dispenser unit/ice storage bin in both the
5)Place the icemaker on top of the dispenser unit/ice storage bin.
Icemaker | Mounting |
| Brackets |
Bolts
Fig. 2a
6a) Ice Storage Bin: Follow the ice storage bin, adapter kit, or top kit instructions for securing the icemaker. If no instructions are available, secure the icemaker using the 2 mounting brackets and the bolts provided. See Fig. 2a.
10