6)Route the bin control lead through the hole in the base, then into the bushing provided. See Fig. 5.
Bin Control Lead
Bushing
Fig. 5
7)While pulling up the bin control lead, hook the bin control on the right side interior wall. Then push the bin control up against the bottom of the unit, and slide to the back until it snaps in place. Make sure the slotted holes at the right side of the bin control are securely placed on the collars at the bottom of the unit. See Fig. 6.
Collars
Bin Control
Fig. 6
NOTICE
Make sure the bin control is securely in place. Otherwise, ice may get between gaps and damage the bin control.
8)Pull up any slack in the bin control lead, then put the bushing attached to the bin control lead back into the hole in the base.
9)Connect the bin control connector to the side of the control box.
10)Make sure the right and left deflectors are in their correct positions with the slotted holes engaged on the collars. Make sure the right and left deflectors are secured with the thumbscrews. See Fig. 7.
12