Friedrich CP18C30 manual Starting Your Air Conditioner-Digital Control

Starting Your Air Conditioner—Digital Control

Money	Auto Swing		Timer
Saver®
		0F
			Temp/Hour
POWER		Hr.
Cool		High
	Mode	Med	Fan Speed
Fan Only		Low
1. Press POWER to turn on air conditioner.
	POWER

Temperature

Press, or press and hold, the plus button to raise the temperature 1º until it reaches 86ºF (30ºC).

0F

Temp/Hour

Hr.

�Press, or press and hold, the minus button to lower the temperature 1º until it reaches 64ºF (18ºC).

Timer Delay

To set the Timer for a 1- to 24-hour delay until the air conditioner turns off (the air conditioner must be On):

1. Press TIMER. Indicator light will flash.

NOTE: When the unit is turned on, it will display the previous
settings for the Mode, Fan Speed and temperature.	Timer

2.Choose mode. See “Mode.”

3.Choose fan speed. See “Fan Speed.”

4.Choose temperature. See “Temperature.”

Mode

1.Press and hold MODE.

2.Choose Cool or Fan mode

�Cool—Cools room. Press FAN SPEED to choose fan speed. Then adjust the temperature by pressing the up or down arrow buttons.

�Fan—Operates the fan at High speed, without cooling. The display shows “FO” (fan only).

Money Saver®

�	Money Saver — Fan and compressor run only when
	cooling is needed. Turns fan off when room temperature
	reaches the temperature setting on the thermostat.

Cool	Money
Mode
Fan Only	Saver®

Fan Speed

NOTE: The Fan Speed button will operate only when the Cool or Power Saver mode has been selected.

1.Press and hold FAN SPEED until you see the indicator light for the desired setting.

2.Choose High, Medium or Low.

2.Press the plus or minus button to change the delay time from 1 to 24 hours.

3.Press TIMER or wait 10 seconds. Indicator light will remain on.

To set the Timer delay for a 1- to 24-hour delay until the air conditioner turns on, keeping previous settings:

1.Turn off air conditioner.

2.Press TIMER. Indicator light will flash.

3.Press the plus or minus button to change the delay time from 1 to 24 hours.

4.Press TIMER or wait 10 seconds. Indicator light will remain on.

To set the Timer delay for a 1- to 24-hour delay until the air conditioner turns on, changing previous settings:

1.Turn on air conditioner.

2.Adjust MODE to desired setting.

3.Adjust FAN SPEED to High, Medium or Low.

4.Adjust temperature between 64ºF (18ºC) and 86ºF (30ºC).

5.Turn off air conditioner.

6.Press TIMER. Indicator light will flash.

7.Press the plus or minus button to change delay time from 1 to 24 hours.

8.Press TIMER or wait 10 seconds.

To clear Timer delay program

NOTE: Air conditioner can be either on or off.

Press and hold TIMER for 3 seconds. Indicator light will turn off.

High

Med Fan Speed

Low

To see the time remaining (in hours)

1.Press TIMER once after it has been set.

2.While the display is showing the remaining time, you can press the plus or minus button to increase or decrease the time.

12