Cleaning and Care

WARNING!

CAUTION!

Before cleaning the plasma filter unit, be sure to turn off the power supply to the air conditioner. Electric shock may result.

●Make sure the plasma filter unit is properly mounted before cleaning or performing other tasks on it. If the unit is not properly mounted, it could fall off and cause damage or injury.

●You can be injured if you touch the heat exchanger when removing or installing the plasma filter unit. Do not insert your fingers between the plasma filter unit and the heat exchanger.

Cleaning the Intake Grille

1.Remove the Intake Grille.

1 Place your fingers at both lower ends of the grille panel, and lift forward; if the grille seems to catch partway through its movement, continue lifting up-

ward to remove.

2Pull past the intermediate catch and open the Intake Grill wide so that it become horizontal.

Intake Grille

Mounting

shaft

Knob

2. Clean with water.

Remove dust with a vacuum cleaner; wipe the unit with warm water, then dry with a clean, soft cloth.

3. Replace the Intake Grille.

1Pull the knobs all the way.

2Hold the grille horizontal and set the left and right mounting shafts into the bearings at the top of the panel.

	Mounting shaft
Intake Grille	Bearing

Knob

Intake Grille

Mounting

shaft

Knob

Cleaning the Air Filter

1. Open the Intake Grille, and remove the air filter.

Lift up the air filter’s handle, disconnect the two lower tabs, and pull out.

Air filter handle

2. Remove dust with a vacuum cleaner or by washing.

After washing, allow to dry thoroughly in a shaded place.

3.Replace the Air Filter and close the Intake Grille.

1 Align the sides of the Air Filter with the panel, and push in fully, making sure the two lower tabs are re- turned properly to their holes in the panel.

Air filter handle

2Close the Intake Grille.

(For purposes of example, the illustration shows the unit without Intake Grille installed.)

●Dust can be cleaned from the Air Filter either with a vacuum cleaner, or by washing the filter in a solution of mild detergent and warm water. If you wash the filter, be sure to allow it to dry thoroughly in a shady place before reinstalling.

●If dirt is allowed to accumulate on the Air Filter, air flow will be reduced, lowering operating efficiency and in- creasing noise.

●During periods of normal use, the Air Filters should be cleaned every two weeks.

●When used for extended periods, the unit may accumulate dirt inside, reducing its performance. We recommend that the unit be inspected regularly, in addition to your own cleaning and care. For more information, consult authorized service personnel.

●When cleaning the unit’s body, do not use water hotter than 108 °F, harsh abrasive cleansers, or volatile agents like benzene or thinner.

●Do not expose the unit body to liquid insecticides or hairsprays.

●When shutting down the unit for one month or more, first allow the fan mode to operate continuously for about one-half day to allow internal parts to dry thoroughly.

En-11

MR09Y1F MR12Y1F, MW09Y1F, MW12Y1F specifications

The Friedrich MW12Y1F, MW09Y1F, MR09Y1F, and MR12Y1F are part of a modern series of air conditioning systems designed for efficiency, reliability, and advanced comfort control. These units are well-suited for residential and light commercial applications, offering innovative features that cater to the specific demands of users, ensuring a comfortable indoor environment throughout the year.

One of the standout features of these units is their impressive energy efficiency ratings. Each model operates with advanced inverter technology, which allows the compressor to adjust its speed according to the cooling or heating demand. This technology not only provides more precise temperature control but also significantly reduces energy consumption compared to traditional air conditioning systems. The enhanced efficiency leads to lower utility bills and a reduced environmental footprint, making these units an eco-friendly choice.

The Friedrich MW12Y1F and MW09Y1F models are equipped with a powerful cooling capacity, suitable for medium to large spaces. The MR09Y1F and MR12Y1F, on the other hand, cater to slightly smaller areas while still delivering outstanding performance. All models come with multiple fan speeds and precise temperature controls, ensuring tailored comfort settings for any conditions.

Moreover, these air conditioning units come with advanced air filtration systems designed to improve indoor air quality. The multi-stage filtration captures dust, allergens, and other airborne particles, making the environment healthier, particularly for individuals with respiratory sensitivities.

User-friendly interfaces make these models easy to operate, with remote control functionalities that allow users to adjust settings from a distance. Some versions also offer smart home compatibility, enabling control via mobile apps or voice commands for enhanced convenience.

Durability is another hallmark of the Friedrich MW and MR series. Constructed with high-quality materials, these units are built to withstand various weather conditions while providing reliable performance throughout their lifespan.

In summary, the Friedrich MW12Y1F, MW09Y1F, MR09Y1F, and MR12Y1F stand out for their energy efficiency, advanced technology, user-friendly features, and robust build quality. These models contribute to comfortable living spaces while prioritizing health and energy savings, making them excellent choices for modern climate control needs.

Friedrich MW09Y1F, MW12Y1F, MR09Y1F MR12Y1F operation manual Cleaning and Care

Models: MR09Y1F MR12Y1F MW09Y1F MW12Y1F