OPERATION

To Select Mode Operation

1

2

Press the START / STOP button (Fig.6 M).

The indoor unit’s OPERATION indicator lamp (red) (Fig. 3 5) will light.

The air conditioner will start operating.

Press the MASTER CONTROL button (Fig.6 H) to se- lect the desired mode.

Each time the button is pressed, the mode will change in the following order.

 

sAUTO

sCOOL

 

 

s DRY

 

 

 

 

 

 

 

 

HEAT t

FANt

 

 

 

About three seconds later, the entire display will reappear.

Example: When set to COOL.

 

To Set the Thermostat

Press the SET TEMP. / SET TIME buttons (Fig. 6 I).

,button: Press to raise the thermostat setting.

- button: Press to lower the thermostat setting.

●Thermostat setting range:

AUTO

64 to 88 °F

Heating

60 to 88 °F

Cooling/Dry

64 to 88 °F

The thermostat cannot be used to set room temperature during the

FAN mode (the temperature will not appear on the remote control unit’s display).

About three seconds later, the entire display will reappear.

Example: When set to 86 °F.

The thermostat setting should be considered a standard value, and may differ somewhat from the actual room temperature.

To Set the Fan Speed

Press the FAN CONTROL button (Fig. 6 L).

Each time the button is pressed, the fan speed changes in the following order:

sAUTO

s HIGH

s MED

sLOW

sQUIET

About three seconds later, the entire display will reappear.

When set to AUTO:

Heating

: Fan operates so as to optimally circulate warmed air.

 

However, the fan will operate at very low speed when the tempera-

 

ture of the air issued from the indoor unit is low.

Cooling

: As the room temperature approaches that of the thermostat setting,

 

the fan speed becomes slower.

 

 

 

 

 

 

 

 

Fan

: The fan runs at the low fan speed.

 

 

 

 

Example: When set to AUTO.

 

The fan will operate at a very low setting during Monitor operation

 

and at the start of the Heating mode.

When set to QUIET:

SUPER QUIET operation begins. The indoor unit’s airflow will be reduced for qui- eter operation.

●SUPER QUIET operation cannot be used during Dry mode. (The same is true when dry mode is selected during AUTO mode operation.)

●Heating and Cooling performance will be reduced somewhat during SUPER QUIET operation.

To Stop Operation

Press the START/STOP button (Fig.6 M).

The OPERATION indicator lamp (red) (Fig. 3 5) will go out.

En-5

Page 5 Page 7
Page 6
Image 6
Friedrich MW09Y1F, MW12Y1F To Select Mode Operation Press the Start / Stop button M, Thermostat setting range
Page 5 Page 7

MR09Y1F MR12Y1F, MW09Y1F, MW12Y1F specifications

The Friedrich MW12Y1F, MW09Y1F, MR09Y1F, and MR12Y1F are part of a modern series of air conditioning systems designed for efficiency, reliability, and advanced comfort control. These units are well-suited for residential and light commercial applications, offering innovative features that cater to the specific demands of users, ensuring a comfortable indoor environment throughout the year.

One of the standout features of these units is their impressive energy efficiency ratings. Each model operates with advanced inverter technology, which allows the compressor to adjust its speed according to the cooling or heating demand. This technology not only provides more precise temperature control but also significantly reduces energy consumption compared to traditional air conditioning systems. The enhanced efficiency leads to lower utility bills and a reduced environmental footprint, making these units an eco-friendly choice.

The Friedrich MW12Y1F and MW09Y1F models are equipped with a powerful cooling capacity, suitable for medium to large spaces. The MR09Y1F and MR12Y1F, on the other hand, cater to slightly smaller areas while still delivering outstanding performance. All models come with multiple fan speeds and precise temperature controls, ensuring tailored comfort settings for any conditions.

Moreover, these air conditioning units come with advanced air filtration systems designed to improve indoor air quality. The multi-stage filtration captures dust, allergens, and other airborne particles, making the environment healthier, particularly for individuals with respiratory sensitivities.

User-friendly interfaces make these models easy to operate, with remote control functionalities that allow users to adjust settings from a distance. Some versions also offer smart home compatibility, enabling control via mobile apps or voice commands for enhanced convenience.

Durability is another hallmark of the Friedrich MW and MR series. Constructed with high-quality materials, these units are built to withstand various weather conditions while providing reliable performance throughout their lifespan.

In summary, the Friedrich MW12Y1F, MW09Y1F, MR09Y1F, and MR12Y1F stand out for their energy efficiency, advanced technology, user-friendly features, and robust build quality. These models contribute to comfortable living spaces while prioritizing health and energy savings, making them excellent choices for modern climate control needs.
Top Page Image Contents