Frigidaire 316259343 Gas Range Installation Instructions, For Models with Sealed Top Burners

Models: 316259343

1 16
Download 16 pages 56.53 Kb
Page 6
Image 6
30" GAS RANGE INSTALLATION INSTRUCTIONS

30" GAS RANGE INSTALLATION INSTRUCTIONS

(For Models with Sealed Top Burners)

5.Read these electrical connection details first then connect electricity to range.

(For Models with Sealed Top Burners)6.Assembly of the Burner Caps and Burner Grates:REMEMBER — DO NOT ALLOW SPILLS, FOOD,Manual backgroundManual backgroundManual background Before servicing, disconnect electrical supply at circuit breaker, fuse or power cord.

Electric Requirements: A dedicated, properly grounded and polarized branch circuit protected by a 15 amp. circuit breaker or time delay fuse. See serial plate for proper voltage.

Extension Cord Precautions:

Because of potential safety hazards under certain conditions, we strongly recommend against the use of any extension cord. However, if you still elect to use an extension cord, it is absolutely necessary that it be a UL listed 3-wire grounding type appliance extension cord and that the current carrying rating of the cord in amperes be equivalent to or greater than the branch circuit rating. Such extension cords are obtainable through your local service organization.

Manual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual background PLEASE READ CAREFULLY! For personal safety, this product must be properly grounded.

Where a standard two-prong wall receptacle is encountered, it is the personal responsibility and obligation of the customer to have it replaced with a properly grounded three-prong wall receptacle.

DONOT,UNDERANYCIRCUMSTANCES,CUTORREMOVE THE THIRD (GROUND) PRONG FROM THE POWER CORD.

Grounding Instructions

The power cord of this appliance is equipped with a

3-prong (grounding) plug which mates with a standard

3-prong grounding wall receptacle to minimize the possibility of electric shock hazard from this appliance. The customer should have the wall receptacle and circuit checked by a qualified electrician to make sure the receptacle is properly grounded and polarized.

6.Assembly of the Burner Caps and Burner Grates:

It is very important to makes sure that all of the Surface Burner Caps and Surface Burner Grates are installed correctly and in the correct locations.

Please Note: The burner heads are secured to the cooktop. THE COOKTOP IS NOT REMOVABLE. Do not attempt to remove or lift the cooktop.

REMEMBER — DO NOT ALLOW SPILLS, FOOD,

CLEANING AGENTS OR ANY OTHER MATERIAL TO ENTER THE GAS ORIFICE HOLDER OPENING. Always keep the Burner Caps and Burner Heads in place whenever the surface burners are in use.

6

Page 6
Image 6
Frigidaire 316259343 dimensions Gas Range Installation Instructions, Assembly of the Burner Caps and Burner Grates