8
Grate
Cooktop
Surface
Burner pan
lip
Place grate over burner pans. Make sure that the groove under grate fits over the
raised lip of the burner pan. The rounded corners of the grates should be placed
toward the front of the cooktop for the front burners and the rear of the cooktop for
the back burners.
Your Cooktop is equipped with three different sizes of burners: Power Burner,
Standard Burner and Simmer Burner.
Place the burner base over each gas opening, matching the burner base size with the
gas opening size. Place the burner cap on each burner base, again matching the cap
size to the burner base size. The cap for each burner has an inner locating ring which
locates the burner cap in the center of the burner.
Make sure each burner cap is properly aligned and level.
Turn the burner on to determine if it will light. If the burner does not light, contact
a Service Center. Do not service the sealed burner yourself.
Placement of BurnerBases and Caps
Burner Cap
Gas
Opening
Burner Pan
Burner
Base
Electrode
Placement of BurnerGrates
The color of the flame is the key to proper burner adjustment. A good flame is clear,
blue and hardly visible in a well-lighted room. Each cone of flame should be steady
and sharply defined. Adjust or clean burner if flame is yellow-orange. To adjust the
flame see the Installation Instructions and to clean burner, see instructions under
General Cleaning.
Proper BurnerAdjustments