13
setting oven controls
setting minute timer
The timer on.oFF pad controls the Minute Timer
feature. The Minute Timer serves as an extra timer in
the kitchen that will beep when the set time has run
out. It does not start or stop cooking. The Minute Timer
feature can be used during any of the other oven control
functions. Refer to “Minimum and Maximum Control Pad
Settings” for time amount settings.
to set the minute timer (example for 5 minutes)
1. Press timer on.oFF. “-- --” will appear and
“timer” will ash in the display.
2. Press the number pads to set the desired time in the
display.
3. Press start. The time will begin to count down with
“5:00” and “timer” will stay in the display.
Note: If start is not pressed the timer will return to the
time of day after 25 seconds.
4. When the set time has run out, “end” and “timer”
will show in the display. The clock will sound with
3 beeps every 5 seconds until timer on.oFF is
pressed.
to cancel the minute timer before the set time has
run out
1. Press timer on.oFF. The display will return to the
time of day.
setting add 1 minute Feature (some
models)
The add 1 minute pad is used to set the Add 1 Minute
feature. When the add 1 minute pad is pressed,
1 minute is added to the Minute Timer feature if this
feature is already active. If the Minute Timer feature is
not active and the add 1 minute pad is pressed, the
Minute Timer feature will become active and will begin
counting down from 1 minute.
SETTING OVEN LOCKOUT FEATURE
The pad controls the Oven Lockout feature. The Oven
Lockout feature automatically locks the oven door and
prevents the oven from being turned on. It does not disable
the clock, Minute Timer or the interior oven lights.
To activate the Oven Lockout feature
1. Press and hold for 3 seconds.
2. After 3 seconds “door loc” will appear, a beep will sound
and “door” and will ash in the display. Once the
oven door is locked the “door” and indicators will
stop ashing and remain on along with the “loc”.
To reactivate normal oven operation:
1. Press and hold for 3 seconds. After 3 seconds “door
oPn” will appear and a beep will sound. The “door”
and will ash in the display until the oven door has
completely unlocked
2. The oven is again fully operational.
setting silent control oPeration
The delaY start and selF clean pads control the
Silent Control operation feature. The Silent Control operation
feature allows the oven control to be operated without
sounds or beeps whenever necessary. If desired the control
can be programmed for silent operation and later returned
to operating with all the normal sounds and beeps.
to change control from normal sound operation to
silent control operation
1. To tell if your range is set for normal or silent operation
press and hold delaY start. “-- --” will appear and
“delaY” will ash in the display. After 6 seconds “beeP
on” or “beeP oFF” will appear in the display.
2. Press selF clean to swi tch between normal sound
operation and silent operation mode. The display will
show either “beeP on” or “beeP oFF”.
Note: If “beeP on” appears, the control will operate with
normal sounds and beeps. If “beeP oFF” appears,
the control is in the silent operation mode.
3. Press start to accept the change or press cancel
to reject the change.
note: The control will always beep at the end of a minute
timer and will beep when a set temperature has been reached,
even if the control is set to silent operation.