Check for proper burner cap placement
Visually check for proper burner cap placement before operating any of the surface burners (See Fig.1).
WARNING
To prevent
CAUTION
To avoid possible burns DO NOT touch burner caps or surface burner grates after using any of the surface burners. The surface burner grates, caps, and areas around them may still be very hot. Provide sufficient time for these areas and the parts to completely cool before handling.
If any of the surface burner caps appears to be resting unevenly, not centered or appears unlevel on the burner head (Fig. 2), be sure to correct the burner cap position on the burner head before starting the surface burner.
BEFORE SETTING SURFACE CONTROLS
Using the griddle (for models equipped with a griddle only)
Before first use:
•Wash griddle in hot soapy water.
•Rinse and dry completely.
Using the griddle:
Remove the center burner grate (some models) and carefully replace with the griddle.
For best results, preheat the griddle for 5 minutes on medium or a medium low setting. Slow preheating provides more even heat distribution during the cooking process. Do not preheat the griddle on Hi setting. Preheating using a Hi burner setting may warp the griddle and prevent even heat distribution.
After each use:
•To prevent possible rusting, store in a dry place and keep uncovered.
•After each use, clean with a stiff brush and hot water only, then rinse.
•Dry immediately.
•Do not clean griddle in the dishwasher.
Fig. 1 - correct burner cap | Fig. 2 - incorrect burner cap |
placement | placement |
Be sure to review the Care & Cleaning section for complete detailed information about cleaning the burner caps and proper burner cap placement.
11
