Convect broil (some models)
Use the convect broil feature to cook thicker cuts of meats that require direct exposure to radiant heat and the convect fan for optimum browing results.
IMPORTANT
Some models are not equipped with the convect broil feature.
Suggestions for convect broil:
1.Be sure to carefully follow all the recommended broil pan and insert instructions and the directions for placing the oven racks as provided in the "broil" section in this Use & Care Guide.
2.Since convect broil cooks food faster, reduce the cook time by 25% from the recommended cook time of your recipe (check the food at this time). If necessary, increase cook time until the desired doneness is obtained.
3.Close the oven door when using convect broil.
To set convect broil (some models) with a default oven set temperature of 550°F:
Step | Press |
1. Press convect keypad 3 times. 
3 times
2. Press start to accept.
To stop convect broil at any time press cancel.
NOTE
The convect fan will begin rotating once convect broil has been activated (some models).
SETTING OVEN CONTROLS
Convect convert
The convect convert feature allows you to convert any baking recipe for the convect feature. The control uses the normal recipe settings and adjusts to a lower temperature for convection baking. The convect convert feature may only be used when convect baking.
To set convect using default oven set temperature of 350°F and adding the convect convert:
Step | Press |
1.Press convect keypad.
2.Press convect convert.
To stop convect convert at any time press cancel.
When convect convert is active with a bake time or a delay start setting, the convect convert feature will display the message "CF" for check food when the bake time is 75% complete (See Fig. 1). At this time the oven control will sound 1 long beep at regular intervals until the set bake time has finished.
Fig. 1
NOTES
•When using convect convert, any cook time reductions needed may vary depending on the oven set temperature.
•When baking layer cakes, use the bake feature to obtain the best results.
•The minimum bake time setting allowed using the convect convert feature is 20 minutes.
•If the oven door is opened when a convect feature is active, the convect fan will stop rotating until the oven door is closed.
25
