SETTING OVEN CONTROLS
Adjusting the oven temperature
Your appliance has been factory calibrated and tested to ensure an accurate baking temperature. For the first few uses, follow your recipe times and temperature recommendations carefully. If you think the oven is cooking too hot or too cool for your recipe times, you can adjust the control so the oven cooks hotter or cooler than the temperature displayed.
The oven temperature may be increased +35°F (+19°C) or decreased
Example: increase the oven temperature by 30°F:
Step | Press |
1.Press and hold bake for 6 seconds.
2.Enter 30.
3.To accept, press start.
Example: decrease the oven temperature by 30°F:
Step | Press |
1.Press and hold bake for 6 seconds.
2.Enter 30.
3.Press self clean.
4.To accept, press start.
NOTES
•Oven temperature adjustments made will not affect the broil or
•If the temperature shows an adjustment of
•DO NOT USE oven thermometers such as those found in grocery stores to check the temperature settings inside your oven. These oven thermometers may vary as much as 20 to 40 degrees from actual temperatures.
Restoring to factory default settings
When new, your appliance was set with a few predetermined oven control settings. Over time, the user may make changes to these default settings.
The following functions or features have user programmable options or adjustments that may have been changed from the original default settings:
•12 or 24 hour clock display mode.
•
•Silent or audible keypad operation.
•Oven temperature display mode (F° or C°).
•Any oven temperature offset adjustment made.
•Temp probe options (some models).
•Any stored favorite recipes (some models).
IMPORTANT
Before restoring the settings, please be aware that all changes made to the oven control settings will be erased once the start keypad is pressed. This includes any temperature offset made for the oven when baking.
To restore oven control to default settings:
Step | Press |
1. Press and hold 7 keypad until
acceptance tone sounds (about 6 seconds).
2. To accept, press start.
Operating the oven light
The interior oven light will automatically turn ON when the oven door is opened.
Press | to turn the interior oven light ON and OFF |
whenever the oven door is closed.
The interior oven light is located at the upper left rear wall of the oven interior and is covered with a glass shield held by a wire holder. The glass shield must be in place whenever the oven is in use.
To change the interior oven light, see "Changing the oven light" in the Care & Cleaning section.
30
