Frigidaire FGET2765KB, FPET3085KF Setting Self-Clean Cycle Time Length, Self-Cleaning,  Note

Models: FGET2765KW FGET2745KW FGET3045KW FGET3045KB FGET3065KF FGET3045KF FGET2765KB FGET2765KF FGET2745KF FGET2745KB FGET3065KW FGET3065KB FFET3025LB FFET3025LW FPET2785KF FPET3085KF

1 32
Download 32 pages 8.75 Kb
Page 25
Image 25
SETTING SELF-CLEAN CYCLE TIME LENGTH

SETTING SELF-CLEAN CYCLE TIME LENGTH

The SELF CLEAN pad controls the Self-Cleaning feature. If you are planning to use the oven directly after a self-clean cycle remember to allow time for the oven to cool down and the oven door to unlock. This normally takes about one hour. So a 3 hour self-clean cycle will actually take about 4 hours to complete.

*It is recommend to use a 2 hour self-clean cycle for light soils, a 3 hour cycle for average soils, and a 4 hour cycle for heavy soils (to assure satisfactory results).

To set the controls for a 3 hour Self-Cleaning cycle to start immediately and shut off automatically

1.Be sure the clock is set with the correct time of day and the oven door is closed.

2.Press SELF CLEAN. “DOOR” will flash. “3:00” and CLn will show in the display. The control will automatically clean for a 3 hour period (default self-cleaning cycle time). For the first 10 seconds, “Remove Racks” will flash and beep to remind you that the racks need to be removed.

When the Self-Clean Cycle is CompletedStopping or Interrupting a Self-Cleaning Cycle NOTE

If a 2 or 4 hour clean time is desired, press SELF CLEAN multiple times to toggle between 2, 3 or 4 hours.

3.Press START. The “DOOR” and “CLEAN” icon will flash; the letters “CLn” will remain on in the display.

4.As soon as the control is set, the motor driven oven door lock will begin to close automatically. Once the door has been locked the “DOOR” indicator light will

stop flashing and remain on and the icon will appear. Also, the oven icon will appear in the display.

Manual backgroundManual background NOTE

Manual background Allow about 15 seconds for the oven door lock to close.

When the Self-Clean Cycle is Completed

1. “HOT” will appear in the display. The time of day, the “DOOR” and icon will remain in the display.

2.Once the oven has cooled down for approximately 1 HOUR, and the “DOOR” is no longer displayed, the oven door can then be opened.

Stopping or Interrupting a Self-Cleaning Cycle

If it becomes necessary to stop or interrupt a self-cleaning cycle due to excessive smoke or fire in the oven:

1.Press CANCEL.

2.The oven door can only be opened after the oven has cooled down for approximately 1 HOUR and the “DOOR” and Manual background icons are no longer displayed.

SELF-CLEANING

The SELF CLEAN and DELAY START pads controls the Delayed Self-Clean operation. The automatic timer will turn the oven on and off at the time you select in advance.

To set the control for the Self-Cleaning Cycle to start at a delayed time and shut off automatically (example: 3 hour self-clean cycle to start at 4:30)

1.Be sure the clock is set with the correct time of day and the oven door is closed.

2.Press SELF CLEAN. “3:00” and CLn will show in the display. The control will automatically clean for a 3 hour period. For the first 10 seconds, “Remove Racks” will flash and beep to remind you that the racks need to be removed.

Manual backgroundManual background NOTE

If a 2 or 4 hour clean time is desired, press SELF CLEAN multiple times to toggle between 2, 3 or 4 hours.

3.Press START. The “DOOR” and “CLEAN” icon will flash; the letters “CLn” will remain on in the display.

4.As soon as the control is set, the motor driven oven door lock will begin to close automatically. Once the door has been locked the “DOOR” indicator light will quit

flashing and remain on and the icon will appear.

5.Press DELAY START. Enter the desired start time using the number pads 4 3 0.

6.Press START. “DELAY”, “DOOR” and “CLEAN” icons will remain on.

7.The control will start the self-cleaning at the set start time, for the period of time previously selected. At that time, the icon “DELAY” will go out; “CLn” and oven icon will remain in the display.

When the Self-Clean Cycle is Completed

1. “HOT” will appear in the display. The time of day, the “DOOR” and icon will remain in the display.

2.Once the oven has cooled down for approximately 1 HOUR, and the “DOOR” is no longer displayed, the oven door can then be opened.

Stopping or Interrupting a Self-Cleaning Cycle

If it becomes necessary to stop or interrupt a self-cleaning cycle due to excessive smoke or fire in the oven:

1.Press CANCEL.

2.The oven door can only be opened after the oven has cooled down for approximately 1 HOUR and the “DOOR” and Manual background icons are no longer displayed.

25

Page 25
Image 25
Frigidaire FGET2765KB Setting Self-Clean Cycle Time Length, When the Self-Clean Cycle is Completed, Self-Cleaning,  Note