4-16
5. With assign btn displayed on the left and the
chosen product (ex. wings) displayed on the right,
press and hold for three seconds a button between 1-0 to
assign the product. The LED in the chosen product button
will illuminate (see Figure 53). To unassign a product
from a button, press and hold the button assigned to that
product for three seconds. The LED no longer
illuminates.
Figure 53
6. Once the button is assigned, press the u (INFO) button (see Figure 54) to save
the assigned button.
The computer displays name on the left with the product (ex. WINGS) on the
right.
7. If no further programming is necessary, press the (2) button (see Figure 55)
twice to return to Level 1 program changing to the Product
selection prompt.
8. Press the (2) button again (see Figure 55) to quit and to return to OFF.
Figure 54
Figure 55
When cooking oil is exhausted, drain the oil into an appropriate container for transport to the
disposal container. Frymaster recommends a McDonald’s Shortening Disposal Unit (MSDU). Do
not drain deep clean (boil-out) solution into an MSDU. NOTE: If using an MSDU built
before January 2004 the filter pan cover must be removed to allow the unit to be positioned beneath
the drain. To remove the cover, lift up on the front edge and pull it straight out of the cabinet. Refer
to the documentation furnished with your disposal unit for specific operating instructions. If a
shortening disposal unit is not available, allow the oil to cool to 100°F (38°C), then drain the oil into
a METAL container with a capacity of FOUR gallons (15 liters) or larger to prevent oil from
spilling.
This option is used to dispose of old oil into either an MSDU or a METAL pot.
1. Remove the filter pan and position the MSDU or METAL container with a capacity of FOUR
gallons (15 liters) or larger under the fryer to drain the oil.
2. With the computer OFF, press and hold the FLTR button (see Figure 56) of
the corresponding vat for three seconds; a chirp sounds
Figure 56
The computer displays filter menu for three seconds, changing to Auto Filter.