4-33
Computer displays select product.
3. Use the 3and 4 to scroll through the product list (see Figure 152).
Figure 152
The computer displays the product selected.
4. With a product selected, press the (1 yes) button to select a product (see
Figure 153.
Figure 153
The computer displays modify alternating with yes no.
5. Press the (1 yes) button (see Figure 154) to continue or the (2) button
to return to PRODUCT SELECTION.
Figure 154
Computer displays LOAD COMP on left side with 4 or some other numeral on the right. This is
the sensitivity setting recommended for this product.
NOTE: It is highly recommended NOT to adjust this setting, as it could have an
adverse affect on the product.
6. If changing this setting, enter a number between 0-9.
7. Press the u (INFO) button to accept selection (see Figure 155).
Figure 155
8. Press the (2) button (see Figure 156) three times to exit.
The computer displays OFF.
Figure 156
4.13.2 E-LOG MODE
The E-LOG mode is used to view the ten most recent error codes encountered on the fryer. These
codes are displayed from 1-10 with the most recent displayed first. The time, date and error code are
displayed.
1. Perform steps 1-3 on page 4-32.
Computer displays e-LOG .
2. Press the (1 yes) button to accept selection (see Figure 157).
Figure 157
3. Use the t and ubuttons (see Figure 158) to scroll through the ten most
recent error codes.
Figure 158
If no errors exist, the computer displays NO ERRORS. Errors are displayed by error code, time
and date. An error code followed by “L” indicates left side of a split vat and “R” indicates right side