4.Open the oil return valve by turning the smaller red handle located under the control panel of the fryer. Move the handle left to right to open the oil return line. This will activate the filter pump also.
Oil return handle
Flatbottom 24G | Flatbottom Drain Valve in Closed Position |
5.If the circuit breaker kicks out, this often means that there is an obstruction in the oil return lines.
Note: The filter circuit is protected by a
6.Polishing: If desired, the oil can be polished. Leave the fryer drain valve open for approximately 5 minutes and allow the oil to circulate from the frypot into the filter and return to the frypot several times before closing the drain valve. The circulating oil will be cleansed repeatedly and polished by the micro filtering powder. Polishing extends oil life and improves cooking flavor.
7.Close the fryer drain valve. To close the flatbottom frypot drain valve, turn the large red drain handle from the 6:00 o'clock position to the 9:00 o'clock position. The frypot will begin to fill up with filtered oil.
Note: After filtering it may be necessary to discard filter paper before filtering another fryer. Replace filter paper when it becomes dark or scuffed in appearance or if refill time becomes extended.
8.Allow the filter to pump bubbles into the fryer for approximately
9.Turn the filter off by turning the oil return handle from right to left. This closes the oil return line to the filtered frypot and shuts down the filter pump motor.
Air bubbles from the Oil Return Line
4
