Frymaster CT16 operation manual Adjusting Bun Compression, Changing Belts

6. Adjusting Bun Compression

1.There are two pairs of compression adjustment knobs (one pair numbered 1-5, the other lettered A- E), as shown in the accompanying illustration. Factory settings are circled.

Crown Compression

Adjustment (1-5)

UPPER COMPRESSION LABEL

Heel Compression

Adjustment (A-E)

Crown Compression

Adjustment (1-5)

2. Settings A and 1 cause the greatest bun compression (that is, the thinnest bun after toasting).

7. Changing Belts

1.Turn the unit off (press the ON/OFF button) then unplug it. If the unit has been in operation, allow it to cool for about 1½ hours. TIP: Change belts in the morning, prior to turning the toaster on.

2.Remove the bun feeder, and then open the cover.

3.Set the bun compression knobs to positions E and 5.

4.Press down on the top roller and move it to the retracted (down) position. (NOTE: Each side of the roller must be locked down.)

4