MPF50S SERIES PORTABLE FILTRATION SYSTEMS
CHAPTER 2: IMPORTANT INFORMATION
2.3 Pre-Installation
NOTE: Failure to use qualified service personnel will void the Frymaster warranty.
A.Standards: Use of this filter unit must be in accordance with all applicable state and local codes.
DANGER
This portable filter is equipped with a
B.Electrical Connections: Domestic MPF50S filter units require 115V 60 Hz., 15 amp electrical supply. International/CE units require 230V 50 Hz., 7 amp electrical supply. Units are equipped with a grounded male receptacle for use with a
2.4Unpacking the Filter System
Ensure the container is upright. Unpack the filter carefully and remove all accessories from the carton. Do not discard or misplace parts and/or accessories; they will be needed for filter setup and operation. Any accessories or starter kits included with the unit will be packaged inside the filter tank.
After unpacking, immediately check the equipment for visible signs of shipping damage. If such damage has occurred, contact the carrier and file the appropriate freight claims. Do not contact the factory, as the responsibility of shipping damage is between the carrier and dealer or
If your equipment arrives damaged:
a.File claim for damages immediately – Regardless of extent of damage.
b.Visible loss or damage – Be sure this is noted on the freight bill or express receipt and is signed by the person making the delivery.
c.Concealed loss or damage – If damage is unnoticed until equipment is unpacked, notify freight company or carrier immediately, and file a concealed damage claim. This should be done within 15 days of date of delivery. Retain the shipping container for inspection.
NOTE: Frymaster does not assume responsibility for damage or loss incurred in transit.
