Frymaster MRE14, BIRE14 warranty Shows HI 2 BAD, Failure with

Problem	Probable Causes	Corrective Action
		This is displayed only during a test
M2000 display		of the high-limit circuit and indicates
	Computer in high-limit test mode.	that the high-limit has failed. DO
shows HI 2 BAD.
		NOT OPERATE THE FRYER! Call
		FASC.
M2000 display
shows PROBE	Damaged computer wiring harness	Call FASC
FAILURE with	or connector.
alarm sounding.
M2000 display	Drain valve not fully closed.	Press the ON/OFF switch off, close
shows IGN		the drain valve(s) completely, then
Failure		press the ON/OFF switch on.
with alarm
sounding. Heating
indicator is on, but
no heat.
M2000 display
shows
LOW TEMP,	A. Failed computer.	A. Call FASC.
heating indicator
cycles on and off
normally.
	B. Damaged computer wiring	B. Call FASC.
	harness.
M2000 display
shows IGN		Call FASC.
failure and	Failed computer.
alarm sounds, but
fryer operates
normally (false
alarm).
Computer will not
go into program		Call FASC.
mode or some	Failed computer.
buttons do not
actuate.
Heat indicator off
upon initial startup.
Display shows	Failed computer.	Call FASC.
or with alarm
sounding.

6-5