FujiFilm A200 Input/Output Terminals, Power Supply and Others, h DC IN 3V Power input socket

Input/Output Terminals

hDC IN 3V (Power input) socket

Socket for specified AC power adapter (sold separately)

h (Special USB) socket

USB (1) for image data output with a personal computer

Power Supply and Others

hPower supply

Use one of the following:

•2AA-size alkaline batteries

•2AA-size Ni-MH (nickel metal hydride) batteries (sold separately)

•AC Power Adapter AC-3V (sold separately)

hNo. of available shots using battery (battery life)

Battery type	With LCD monitor	With LCD monitor
	ON	OFF
Alkaline batteries	Approx. 180 frames	Approx. 270 frames
Ni-MH batteries	Approx. 270 frames✽	Approx. 400 frames✽
HR-3UF

(Condition: Power saving mode ON, with fully charged battery (Ni-MH))

This indicates the number of available frames shot consecutively at room temperature with a flash use rate of 50%. Note that these figures may vary depending on the ambient temperature and the amount of charge in the battery. The number of available shots or available shooting time will be lower in cold conditions.

hConditions for use

Temperature: 0°C to + 40°C (+ 32°F to + 104°F); 80% humidity or less (no condensation)

h Camera dimensions (W/H/D)

98.5 mm ⋅ 64.5 mm ⋅ 40.5 mm/3.9 in. ⋅ 2.5 in. ⋅ 1.6in. (not including accessories and attachments)

h Camera mass (weight) Approx. 132 g/4.7 oz.

(not including accessories, batteries or xD-Picture Card) h Weight for photography

Approx. 190 g/6.7 oz.

(including batteries and xD-Picture Card) h Accessories

See P.7

h Optional Accessories

See P.98, 99

✽ These specifications are subject to change without notice. FUJIFILM shall not be held liable for damages resulting from errors in this Owner’s Manual.

✽ The LCD monitor on your digital camera is manufactured using advanced high-precision technology. Even so, small bright points and anomalous colors (particularly around text) may appear on the monitor. These are normal display characteristics and do not indicate a fault with the monitor. This phenomenon will not appear on the recorded image.

✽ The operation error may be caused in a digital camera by the strong radio interference (i. e. electric fields, static electricity, line noise, etc.).

✽ Due to the nature of the lens, the edges of photographed images may appear distorted. This is normal and does not indicate a fault.

113