FujiFilm A200 manual Select User’s registration and click the OK button, Bottom

3.Select “User’s registration” and click the [OK] button.

✽If you are not already connected to the Internet, connect now. (A dial-up dialog box may be displayed.)

✽Only select menu acquisition if you have already completed the user registration process and you have re-installed “FinePixViewer”, etc.

4.The User’s Registration dialog box opens. Select the country or area where you are living and click the

[OK] button.

✽The actual user registration page may differ slightly in appearance from the sample shown here.

✽If the country or area where you are living does not appear in the pull-down list, select “OTHERS”.

5.When the browser starts up, proceed as directed by the on-screen instructions.

6.Enter the required information in the user registration page.

1

2

3

4

1 Enter the name of your choice (nickname, etc.). 2 Enter a password of your choice using letters

and/or numbers. Then enter the password again for confirmation.

3 Enter your name.

4 Enter your E-mail address.

5 Enter the remaining required information.

✽ After you register, a confirmation E-mail message is sent to you. Be sure to enter a valid E-mail address at which you can receive the message.

✽ The actual user registration page may differ slightly in appearance from the sample shown here.

7. When you have entered all the required information, click the [Register] button at

the bottom of the page.	8
Once you complete the registration, a confirmation
E-mail is sent. Wait a few moments until the
message is sent.	93