FujiFilm A200 Use at DSC mode, Slide the power switch to the side to turn the camera on, Ｓｅｔ－Ｕｐ

7.2 Use at DSC mode

ＳＥＴ－ＵＰ
ＩＭＡＧＥ ＤＩＳＰＬＡＹ	ＯＦＦ
ＰＯＷＥＲ ＳＡＶＥ	ＯＮ
ＵＳＢ ＭＯＤＥ	ＤＳＣ
ＤＡＴＥ／ＴＩＭＥ	ＳＥＴ
ＯＫ	ＢＡＣＫ

1.Load an xD-Picture Card containing photographed images into your camera. Plug the AC power adapter connector into the DC IN 3V socket on the camera and then plug the adapter itself into the main power outlet.

2.Slide the power switch to the side to turn the camera on.

3.Set the “USB MODE” setting in the “SET–UP” menu to “DSC” (➡P.64, 65).

4.Slide the Power switch to the side to turn

80 the camera off.

(Special USB)
socket
Camera	USB	PC
AC power adapter	socket

✽ Sold separately

5.Switch your PC on.

6.Use the special USB cable to connect the camera to your computer.

7.Switch the camera on.

If you are using a Windows PC, the driver settings are specified automatically when installation is completed. No further action is required.

Always use the prescribed procedure when disconnecting or switching off the camera (➡P.86).

✽On Windows XP and Mac OS X, you must specify the automatic launch settings the first time you connect the camera to your computer.

✽Take care to ensure that the special USB cable is connected the correct way around and that the plugs are pushed fully into the connection sockets.