FujiFilm A200 manual Enable File Exchange, Switch on your Macintosh and start up Mac OS 8.6 to

6.3Installation on a Mac OS 8.6 to 9.2

6.3.1Check the system software settings

■Enable File Exchange

Check whether File Exchange is active.

To use an xD-Picture Card that is supported by the camera, the File Exchange utility supplied with Mac OS must be running.

1.Switch on your Macintosh and start up Mac OS 8.6 to 9.2.

NOTE

Do not connect the camera to your Macintosh until the software installation is completed.

2.Select the Extension Manager in the Control Panel and check that the File Exchange check box is ticked. If not, click in the box so that an appears and then restart your Macintosh.

6.3.2From FinePixViewer installation to restart

1.When you load the enclosed CD-ROM into the CD-ROM drive, the “FinePix” window automatically opens.

NOTE

If the “FinePix” window does not open automatically, double-click the CD-ROM icon.

2.Double-click “Installer for MacOS8.6-9.x” to launch the Installer.

3.The Installer setup screen appears. Click the [Installing FinePixViewer] button.

✽For more information on what is installed, click the [Read Me First] button and [Using FinePixViewer] button.

4.A confirmation message appears asking whether you want to continue with the installation. Click the [OK] button.

5.The User License Agreement for this software is displayed. Read the agreement carefully and then, if you agree to the terms of the Agreement, click the [Yes] button. If you click the [No] button, the software is not installed.

6

73