Inserting a Memory Card

Inserting a Memory Card

1 Open the battery-chamber cover. Lightly press the center

of the battery-chamber cover and open it as shown.

1Note

Be sure the camera is off before opening the battery -chamber cover.

2Insert the memory card.

Holding the memory card in the orientation shown below, slide it all the way in.

Be sure card is in correct orientation; do not insert at an angle or use force.

3Close the battery-chamber cover. Close the battery-cham-

ber cover and then lightly press it down and slide it in to latch.

Removing Memory Cards

After confi rming that the camera is off, press the card in and then release it slowly. The card can now be removed by hand.

3Cautions

The memory card may spring out if you remove your fi nger immediately after pushing the card in.

Memory cards may be warm to the touch after be- ing removed from the camera. This is normal and does not indicate a malfunction.

12