FujiFilm FinePix F40fd, FinePix F45fd MEMO, CHECK, USET-UP, File number, Frame number, <CONT.> <RENEW, Directory number, When the camera settings are, How to use the SET-UPmenu (➝p.106)

USET-UP How to use the SET-UP menu (➝p.106)

FRAME NO.

Use this function to specify whether frame numbers are assigned consecutively from previous numbers or begin again.

<CONT.> <RENEW>

A

B

*Formatted Memory Card or internal memory used for both A and B.

CONT. : Pictures are stored beginning from the highest file number stored on the last Memory Card or internal memory used.

RENEW : Pictures are stored on each Memory Card beginning with a file number 0001.

Each image will be numbered consecutively from the last number used. So when recorded images in the Memory Card are erased, the number of the erased frame will not be used again. Even erasing all frames in the Memory Card will not return the number to 0001.

CHECK

Frame number

100 - 0001

File numberDirectory number

The last 4 digits of the 7-digit number in the top right corner of the LCD monitor are the file numbers, while the first 3 digits show the directory number.

MEMO

•Setting this function to CONT. makes file management easier as it makes sure that file names are not duplicated when images are downloaded to a PC.

•When the camera settings are RESET (➝p.108), the frame number setting (CONT. or RENEW) is changed to CONT. and the frame number itself does not return to 0001.

•In CONT. setting, images are stored beginning from the highest file number on the current Memory Card when the Memory Card already contains image files with file numbers higher than the highest file number on the last Memory Card.

•The displayed frame number may differ for images photographed on other cameras.

110