FujiFilm FinePix F40fd, FinePix F45fd side, space, rBUSY, Remedy, camera, camera, formatted, \CARD FULL, YCARD FULL, free space, SET-UPmenu, Explanation, • Camera fault, Warning Displays

Warning Displays

Warning Displayed	Explanation	Remedy
	• The Memory Card contact area is soiled.	• Wipe the contact area on the Memory Card with a
	• The Memory Card format is incorrect.	soft, dry cloth. It may be necessary to format the
		Memory Card (➝p.113). If the message still
CARD ERROR		appears, replace the Memory Card.
	• Camera fault.	• Contact your FUJIFILM dealer.
	• The Memory Card is damaged.	• Insert a compatible Memory Card that is
	• Inserted Memory Card is not compatible with your
	camera.	operationchecked at FUJIFILM Corporation.
\CARD FULL	The internal memory or Memory Card is full.	Erase some images in internal memory or Memory
		Card (➝p.43), or use a Memory Card that has ample
YCARD FULL		free space.
	• The data could not be recorded due to a Memory	• Re-insert the Memory Card or turn the camera off
	Card error or a connection error between the	and then on again. If the message still appears,
	Memory Card and camera.	contact your FUJIFILM dealer.
WRITE ERROR	• The image cannot be recorded as it is too large to	• Use a new Memory Card.
	fit in the available space on the Memory Card.	• Format the Memory Card or internal memory on
	• The Memory Card or internal memory is not
	formatted.	the camera (➝p.113).
PROTECTED CARD	The SD Memory Card switch is slide to the “Lock”	Unlock the protection by sliding it back (➝p.20).
	side.
INTERNAL MEMORY IS	The data could not be recorded or copied since the	Erase some images from the internal memory
FULL	internal memory is full.	(➝p.43), or use a Memory Card that has ample free
INSERT A NEW CARD		space.
rBUSY	The timing for recording was incorrect because the	Use an Memory Card that was formatted on the
	Memory Card was formatted on a PC.	camera.
	The frame number has reached 999-9999.	AInsert a formatted Memory Card into the camera.
		BSet RENEW as the FRAME NO. setting in the
FRAME NO. FULL		USET-UP menu (➝p.110).
		CStart taking pictures (The frame number starts
		from “100-0001”).
		DSet CONT. as the FRAME NO. setting in the U
		SET-UP menu.

144