Loading the Memory Card

CAUTION

Be sure to unlock the protection of the SD Memory Card before inserting it. If it is locked, recording/deleting images, as well as formatting are not available. To unlock the protection, slide the switch back, and the SD Memory Card will work normally.

Protection switch

CAUTION

A new SD Memory Card or a card previously used on a PC or any device other than the camera should be formatted (p.113) on the camera before use.

Do not use a miniSD adaptor or a microSD adaptor which have exposed contact areas on the back. Use of these adaptors may cause a malfunction or damage due to the improper contacts.

3 Close the battery cover.

How to replace the Memory Card

Push the Memory Card into the slot and then slowly remove your finger. The lock is released and the Memory Card is pushed out.

20