Connecting to a PC

By connecting the camera to a PC, your system can be expanded to fill a wide range of uses. Using “FinePixViewer” performs images saving, browsing and file management etc.

MEMO

If the power cuts out during data transmission, the data will not be transmitted correctly. Always use the AC power adapter when connecting the camera to a PC.

Refer to Software

 

Installation (p.122, 125)

 

the first time you connect

 

the camera to your PC.

 

Install the software first. Do

 

not connect the camera to

CD-ROM

the PC before installing all

(Software for FinePix CX)

the software.

 

AInsert the Memory Card with images into the camera (p.19).

You can use the xD-Picture Card and the SD Memory Card with the FinePix F40fd / FinePix F45fd. In this Owner’s Manual, these cards are expressed as “Memory Card”.

CAUTION

Do not format the Memory Card in the camera on the PC.Use the Memory Card with images taken by a FUJIFILM Digital camera.

When connecting to a PC, if the Memory Card contains large image or movie files, connection or transmission may take time or images may not be stored. In these cases, use the Image Memory Card Reader (sold separately), etc. Note that the Image Memory Card Reader DPC-R1 is not compatible with the SD Memory

128Card.
BConnect the camera to your PC using the USB cable (included).

;USB socket

AC-5VX

(sold separately)

CPress wfor about 1 second to turn the camera on in Playback mode.