FujiFilm Z100fd flash, Flash, than C, , , or, battery, blurred, selected, pictures, cannot be, The playback, The image is, on the image, image is dark, Cannot use the

Troubleshooting

Matters	Problems		Possible causes						Solutions	Page
		The shutter button was pressed while the							Wait until the charging is completed before	62
		flash was charging.							pressing the shutter button.
		The Shooting mode is set to				, ,,	,		Change the Shooting mode.	53
		or .
	Cannot use the	The battery has run out.							Charge the battery or load fully charged	14, 16
									battery.
	flash.
		Continuous shooting is selected.							Set continuous shooting to OFF.	70
		The flash mode is set to C.							Set the flash mode to something other	61
									than C.
Flash
		Silent mode is set.							Release Silent mode.	26
	The flash settings	The Shooting mode is set to AUTO,					,		The flash settings are restricted because
		, ,, ., /,		, ,	,	, ,		,	the camera settings are tailored to the	53
	are restricted and	, , or	.						scene being shot. Change the Shooting
	cannot be								mode for a wider range of flash settings.
	selected.
		Silent mode is set.							Release Silent mode.	26
	The playback	The subject is too far away.							Move to within the effective flash range	59, 62
	image is dark								before taking the picture.
	even though the
		Your finger was covering the flash.							Hold the camera correctly.	28
	flash was used.
		The lens is dirty.							Clean the lens.
	The image is	AF frame (lit red) and {appeared when							Check the focus on the subject and take	29,
		taking pictures.							pictures.	134
	blurred.
Photographed images		appeared when taking pictures.							It may cause camera shake. Hold the	30,
									camera steadily.	134
	There is speckling	The picture was taken with a slow shutter							This is a characteristic of CCDs and does	–
	on the image.	speed (long exposure) in a high-							not indicate a camera fault.
		temperature environment.

142