OWNER’S MANUAL
Warning
IMPORTANT
EC Declaration of Conformity
Disposal of Electric and Electronic Equipment in Private Households
Disposal of used Electrical & Electronic Equipment
product
In Countries outside the EU:
Contents
Setting the language, date, and time
Using Intelligent Face Detection/Red-eye
Removal when taking pictures
taking pictures
[ PLAYBACK MENU]
Sending and receiving images
Transmitting and saving blog images
Setting the [PLAYBACK MENU]
Setting automatic playback
Usable Memory Cards
About this Manual
ZNote
ZUsing the Wheel Dial
Changing folders (➝p.27)
Accessories Included
Camera Parts and Features
Example of LCD Monitor Text Display
Charging the Battery
Z<Charging Indicator and Statuses
Charging
Status
Action
Battery not loaded
Loading the Battery
3 Close the battery cover
To remove the battery
MEMO
Loading the Memory Card
Protection
Switch
How to replace the Memory Card
Loading the Memory Card
•Operation of this camera is only guaranteed when it is
•See p.133 for information on the xD-PictureCard and the internal memory
•See p.152 for information on the standard number of available frames
ZAbout internal memory
Turning On and Off
1 [] screen appears when turning the camera on
2 Set the date and time
3 Change the date format
Date format
Correcting the Date and Time
Selecting the Language
Setting Silent Mode
Taking Pictures (AUTO Mode)
Holding the camera correctly
Brace your elbows against your sides and hold the camera with both hands
Do not cover the lens or flash with your fingers
T button
(Zoom out)
5 Press the shutter button fully
Double
beepClick
AF frame
•Not focus on the subject No sound
Flash
When selecting a slow shutter speed that will cause camera shake
See
ZIndicator lamp display
Indicator lamp
Available Shooting modes: AUTO, , , H, /, , , , , , s
OFF
When there are multiple
people in the frame
Intelligent Face Detection
CHECK [ FACE DETECTIONbREMOVAL ON]
Available Photography modes: All (except for )
Subjects not suitable for Intelligent Face Detection
32For such subjects use AF/AE lock (➝p.33)
Camera shake and blurring may remain depending on scenes
1 Move the camera slightly so that one of the
Using
subjects is in the AF frame
2 Press the shutter button down halfway to focus on the subject
•AF/AE lock can be applied repeatedly before the shutter is released
Subjects not suitable for autofocus
Very shiny subjects such Fast moving subjects as a mirror or car body
•Subjects photographed through glass
•Subjects that do not reflect well, such as hair or fur
Select the LCD monitor display
Press DISP/BACK to change the LCD monitor display
Text displayed
Framing guideline displayed
Viewing the Images
ZSetting the password
ZInputting password
Intelligent Face Detection
1 Zoom in / Zoom out
W button (Zoom out)
Zoom bar
2 Display another part of the image
Navigation screen (Current displayed image)
Page
•The [PRIVATE] folder with a password set cannot be displayed
In sorting by date mode (➝p.36), you can view all images taken on the same day
AMove the cursor (colored frame) to the selecting frame
In sorting by date mode, images in one folder are displayed in order of date
To display all images in the camera, use micro thumbnails playback
Page
Playback mode (➝p.36)
Page
erased
the frames (files) before erasing them (➝p.87)
• If [DPOF SPECIFIED. ERASE OK?] or [DPOF
OK again to erase the frames (files)
ASelect [OK]
Moving or Copying the Images
Page
Moving or Copying the Images
DPress MENU/OK to move all the frames (files)
When
ASelect [COPY]
BPress MENU/OK to open a folder selecting screen
Page
Page
Using the Shooting Functions — Procedure of Setting
ZSpecifying functions using [SHOOTING MENU]
Setting the Shooting Mode
Page
<Setting frames
You can select 4 types of frames:
ASelect [AUCTION MODE] from the top menu
BShow a frame selecting display
CSelect the frame
Use this mode for shooting evening and night scenes
A picture is taken with a slow shutter of up to 3 seconds
Use this mode to shoot fireworks
It is effective for taking more vivid shots of fireworks with a slow shutter
•Flash cannot be used in the Fireworks mode
Page
Page
eMacro (Close-up)
dSetting the Flash (Intelligent Flash)
Available flash modes in Photography modes
d Setting the Flash (Intelligent Flash)
When [ FACE DETECTION bREMOVAL ON] is set:
Effective flash range (: [AUTO]) Wide-angle:
Approx. 70 cm to 3.6 m (2.3 ft. to 12.8 ft.) Telephoto:
Approx. 70 cm to 2.9 m (2.3 ft. to 9.5 ft.)
*Self-Timer
Self-Timer
2 Take pictures in selected time
Using the 2-second self-timer
•To stop the self-timer,once it has started running, press DISP/BACK
•Any of the following cancels the self-timersetting:
Available Photography modes: [AUTO], , , H
/, , , , , , s
1 Set the self-timer
The self-timersetting changes each time you press * (o)
OFF
4 Take pictures in selected time
Using [SHOOTING MENU]
ZList of SHOOTING MENU options
Menu
Functions
Settings
Factory
Shooting mode: [AUTO], , H
Shooting mode: s
Shooting mode:
SHOOTING MENU]
Setting the shooting menu (➝p.67)
•The speed of continuous shooting varies depending on the shutter speed
Available Shooting modes:
All (except for , ) (➝p.54 – 58)
Shooting continues as long as
Page
Available Shooting mode: s
(➝p.54, 55)
Guide to compensation
AUTO: Automatic adjustment
6: Shooting outdoors in good weather
7: Shooting in shade
9: Shooting under Daylight fluorescent lamps
0: Shooting under Warm White fluorescent lamps
Area shot and quality setting
Area shot excluding % Area shot with %
[AUTO]/1600/800/400/200/100/64
Use this menu to specify required color tone
It is effective for taking vivid shots or black and white shots
FinePix COLOR settings
[p-STANDARD]
are set to standard
Available Shooting mode: s(➝p.54)
(When Intelligent Face Detection is turned OFF)
Use this mode to specify focusing mode that best suits the subject
: CENTER
: MULTI
Page
[PLAYBACK MENU]
[ PLAYBACKMENU]MENU]
(Angle: up to approx.15°)
•Make sure the receiving camera is turned on when transmitting image data
80on the printer type
•Movie images cannot be transmitted
Page
MEMO Trimming Images
MEMO Effect on images
ASelect the frame (file) to save
BPress (o) to save the image
When saved blog images are played back
Saved blog images cannot be rotated or trimmed
Using [PLAYBACK MENU]
Setting the playback menu (➝p.84)
•To interrupt [SLIDE SHOW], press MENU/OK
•You can select BGM during slide show
•Scrap book view will select the size and position of the images automatically
•The Auto power off function (➝p.111) does not operate during a slide show
Use this mode to rotate an image and to display correct direction
An image can be rotated only when playing back using FinePix Z100fd
ESelect [ IMAGE ROTATE]
FThe image rotating screen appears
GRotate the image
Press DISP/BACK to cancel rotating the image
To protect or unprotect only the selected frame (file):
Unprotected
Protected (Fappears)
ASelect the protecting/unprotecting frame (file)
Press MENU/OK to protect all the frames (files)
Press MENU/OK to unprotect all the frames (files)
MEMO To stop the procedure midway
Microphone
time
Select an image file with a voice memo. # appears on the LCD monitor
(Setting the camera to wPlayback mode (➝p.36))
ZPlaying back voice memos
Control
Description
[WITH DATEE] : The date will be imprinted on your prints
[WITHOUT
DATE]
prints
[RESET ALL]
•When DPOF settings were specified on another camera
•Prints of up to 999 frames (files) can be ordered on the same Memory Card
•DPOF settings cannot be specified for movies
Make sure to press MENU/OK when your settings are complete
Page
ZuPRINT ORDER (DPOF)
W button
T button
(Zoom out)
Page
rRecording Movies
2 Record movies
CHECK Recording movies
rRecording Movies
Press MENU/OK to open the top menu to select [SHOOTING MENU]
ASelect
CChange the setting
ZQuality settings in Movie mode
wPlaying Back Movies
w Playing Back Movies
•You may not be able to play back some movie files recorded on other cameras
•Uncover the speaker. The sound is difficult to hear
[U SETUP]
[U SETUP]
How to use the [SET-UP]menu (➝p.103)
Setting
Explanation
Page
Factory default
FORMAT]
Initializes a Memory Card or internal memory
Select this menu to erase all the frames (files)
Specifies the language used for LCD monitor
[3 SEC]/[1.5 SEC]:
The image appears for about 3 or 1.5 seconds and is then recorded
[ZOOM (CONTINUOUS)]:
The image appears enlarged. Use this mode to check details of image
•[IMAGE DISP.] cannot be used when [hLONG PERIOD] (➝p.72) is set
<CONT.> <RENEW
*Formatted Memory Card or internal memory used for both A and B
[RENEW] : Pictures are stored on each Memory Card beginning with a file number
Frame number
File number
[CONTINUOUS]:
The Dual Image Stabilization function is activated always at photography mode
[SHOOTING ONLY]:
Use this function to shoot enlarged images than maximum optical zoom scale
ZZoom bar display
ZSTANDARD
ZPOWER SAVE
ASelect the volume type
BChange the setting
CPress MENU/OK to confirm the setting
Page
Initialize (format) the Memory Card or internal memory for use with the camera
YFORMAT:
Internal memory
\FORMAT:
Memory Card
1 Use Time difference function
2 Move to [TIME DIFFERENCE] screen
3 Set time difference
Available time setting
Connecting to a TV
Connecting Camera Directly to Printer — PictBridge Function
Connecting Camera Directly to Printer — PictBridge Function
PRINT setting
To specify more PRINT settings, repeat steps Aand B
CPress MENU/OK to display the confirm setting
MEMO Printing with date
APress DISP/BACK to open the menu
BSelect [uPRINT DPOF]
Connection Camera
Disconnecting the printer
Installation on a Windows PC
Installation on a Windows PC
1 Install FinePixViewer as instructed by the on-screeninstructions
Launching the installer manually
ADouble-clickthe “My Computer” icon
*Windows XP users should click “My Computer” in the “Start” menu
Installation on a Mac OS
3 Double-clickon “Installer for MacOS X”
6 Install FinePixViewer as directed by the on- screen instructions
8 Launch “Image Capture” from the “Applications” folder
10Select “Other...” from “When a camera is connected, open”
12Select “Quit Image Capture” menu in the “Image Capture” menu
Connecting to a PC
•Auto power off is disabled during USB connection
•Before replacing the Memory Card, always disconnect the camera from the PC
•Always use FinePixViewer to transfer images with voice memos to a PC
Always use the FUJIFILM AC Power Adapter
•Make sure that the USB cable (included) is connected correctly and securely
Connecting to a PC
•You can only see images saved on a PC. Save images on a PC
Proceed to “Using FinePixViewer” (➝p.127)
CAUTION (Mac OS X)
Note on disconnecting the camera
•What is explained in “How to Use FinePixViewer”
Example: Looking up slide shows
Windows
Software
Macintosh
System Expansion Option
Accessories Guide
•PC Card Adapter DPC-AD
•CompactFlash™ Card Adapter DPC-CF
• Waterproof Case WP-FXZ100(upcoming)
•Soft case
Using Your Camera Correctly
ZHandling Memory Card
MEMO Type M and H of xD-PictureCard
•Type M
FinePix Z100fd is compatible with Type M
•Type H
Warning Displays
• The Memory Card format is incorrect
• The Memory Card is damaged
[\MEMORY FULL]
The internal memory or Memory Card is full
[YMEMORY FULL]
Warning Displays
• This file cannot be played back
• The movie and image cannot be played back
movie that was not recorded on this camera
[TOO MANY FRAMES]
DPOF frame settings
be specified on the same Memory Card is
DPOF settings
DPOF printing cannot be used with this image
an image that is not supported by DPOF
• The image format is not transmittable
• A movie can not be sent
is displayed)
• Transmission was disconnected during IR
communication
Troubleshooting
Troubleshooting
There is no battery in the camera
Load the battery
begin
The charging
ZShooting
pressing the shutter button
Cannot use the
flash
Set continuous shooting to OFF
Set the flash mode to something other
Page
ZPlaying back
ZConnecting
ZOthers
Camera malfunction may be caused
temporarily
reload the battery or reconnect the AC
buttons on the
Specifications
Specifications
Sensitivity
AUTO/Equivalent to ISO 64/100/200/400/800/1600 (normal output sensitivity)
Photometry
TTL 256-zonesmetering
White balance
Fluorescent (Cool White), Incandescent)
Self-timer
Approx. 2 sec./10 sec
Flash type
Power supply
separately)
Guide to the number of available frames for battery operation
Battery Type
Number of frames
Nominal voltage
Nominal capacity
Operating temperature
Dimensions
Mass (Weight)
Quality setting
Number of recorded
Image data size
(approx.54 MB)
16 MB
Page
Explanation of Terms
FUJIFILM Digital Camera Worldwide Network
FUJIFILM Digital Camera Worldwide Network
Page
Page
Page
Page
Page
Page
Memo
http://www.fujifilm.com/products/digital_cameras/index.html
http://www.fujifilm.com/products/ digital_cameras/index.html
■ Handling the Battery
*Confi rm your battery type before reading the
following descriptions
1Camera uses the Rechargeable Lithium-ionBattery
■Battery Features
